To print with QuickDraw GX, you need a QuickDraw GX printer driver for your printer.
• If you have an Apple printer, the QuickDraw GX versions of your currently installed printer drivers except the Color StyleWriter Pro are installed with the QuickDraw GX software. All Apple printers (except the Apple Color Printer) have GX drivers.
• The Color StyleWriter Pro GX driver is available from these electronic on-line services:
eWorld: go apple
CompuServe: GO APLSUP
America OnLine: keyword ftp, then connect to ftp.info.apple.com
FTP: ftp.info.apple.com
Web: http://www.info.apple.com
• If you have a non-Apple printer, check with your Apple-authorized dealer or contact your printer vendor directly to make sure that you have the right printer driver for your printer. For printer vendor contact information, see the "QuickDraw GX Printer Driver Upgrade Information" section below.
• The AppleTelecom 2.0 package—with Express Modem and GeoPort fax drivers—is compatible with QuickDraw GX. For more information, see the "QuickDraw GX Fax Information" section later in this file.
QuickDraw GX and WorldScript II
Make sure that you are using WorldScript II version 7.2 or later. QuickDraw GX is not completely compatible with versions of WorldScript II prior to 7.2.
QuickDraw GX and At Ease
Make sure that you are using At Ease version 2.0.3 or later.
QuickDraw GX Printer Driver Upgrade Information
If you are using a non-Apple printer, use the information below to contact the vendor about a printer driver upgrade. If your printer's vendor is not listed here, see the manual that came with your printer for contact information.
CalComp—PostScript compatible printers from CalComp should work with the standard
LaserWriter GX PostScript driver. If you have any problems using QuickDraw GX
with CalComp products and are within the United States or Canada, call CalComp
at 800-451-7568. Outside the United States or Canada, contact the
office in your area as listed in an appendix of your User's Guide.
Epson America—For information about Epson QuickDraw GX drivers, call the Epson End User
Support Center at 1-800-922-8911.
GCC Technologies—For information about GCC QuickDraw GX drivers and upgrade information contact GCC Technical Support at one of these numbers:
Phone Number: 617-276-8620
Fax Number: 617-275-1115
CompuServe: 67004,2302
AppleLink: D0126
GEnie: GCC.TECH
America OnLine: GCC TECH
GDT Softworks Inc.—For upgrade information about GDT Softworks products (PowerPrint 2.5,
Hewlett-Packard—If you need Post-Sale Assistance, Technical Assistance, or if you have any kind of questions about H-P peripherals, contact the H-P Computer Products Customer Support Center at 208-323-2551.
For users of Hewlett-Packard printers, the fastest way to get a QuickDraw GX printer driver is from one of these electronic on-line services:
AppleLink: Hewlett-Packard folder
CompuServe: HP Peripherals forum (HPPER)
Library 9
Internet: FTP to IP address 192.6.71.2
Name - Anonymous
Password - Send User Identification
HP Download Service: 208-344-1691 (modem settings: parity, N; data bits, 8; stop bits, 1)
To receive detailed instructions on accessing these on-line services, contact
HP FIRST, Hewlett-Packard's document FAX retrieval service:
Inside the U.S. and Canada: 1-800-333-1917 (Then press 1 for HP FIRST.)
Outside the U.S. and Canada: 208-344-4809
To receive a disk with the QuickDraw GX printer driver, contact the HP Software Distribution Center at 303-339-7009. A nominal charge for materials and shipping applies.
Kodak—Call 1-800-CDKODAK, for technical support. To update and provide discussion for EKC drivers and print utilities, log on to CompuServe and 'go kodak'. In the Library menu, select browse and in the browse sections, select Kodak Printers. You can download these upgrades from CompuServe!
Lasermaster—For QuickDraw GX driver updates from Lasermaster, call Lasermaster
Technical Support at 612-944-8509.
Lexmark International—Lexmark/IBM customers can get the latest QuickDraw GX drivers from:
Technical Support: 606-232-3000
Lexmark Bulletin Board: 606-232-5238
Internet: anonymous ftp at ftp.lexmark.com
CompuServe: Go Lexmark
Microspot—For information about "MacPlot Raster GX" and "MacPlot Pen Plotter Professional
GX" Chooser level GX drivers or upgrade information, contact the Sales Department:
Microspot
12380 Saratoga-Sunnyvale Road, Suite 6
Saratoga, CA 95070
Phone Number: 1-800-622-7568 (1-800-MACPLOT) or 408-257-4000
AppleLink: MICROSPOT
America OnLine: MICROSPOT1
CompuServe: 70274,3650
NEC Technologies—Contact NEC Technical Support at 800-388-8888 or use one of the following:
NEC Bulletin Board: 508-635-4706
Main Phone Number: 508-264-8000
Main FAX Number: 508-264-8673
Support on AppleLink: NEC Technologies forum in Third Parties
QMS, Inc.—For assistance with QMS printers, drivers, and driver updates, call QMS Customer
Technical Assurance:
Phone Number: 205-633-4500
FAX Number: 205-633-3716
Seiko Instruments—QuickDraw GX is supported by Seiko Instruments for the ColorPoint PostScript printer line with four drivers:
ColorPoint PS, PSX or PSN ColorPoint PS/PSX/PSN GX driver
ColorPoint PSE ColorPoint PSE GX driver
ColorPoint PSH ColorPoint PSH GX driver
ColorPoint PSF ColorPoint PSF GX driver
All driver upgrades are free and are available now:
Technical Support Department: 1-800-553-5312 (inside USA)
Technical Support Department: 408-922-5800
Seiko Bulletin Board: 408-428-9810
SuperMac Technology—For the SuperMac ProofPositive and the SuperMac Splash -- contact SuperMac Technical Support at 1-800-541-7680.
Tektronix—In the US and Canada, call Customer Support at 1-800-835-6100 or use the following:
Fax Number: 503-682-2980
AppleLink: TEK.SUPPORT
Tektronix Bulletin Board: 503-685-4504
International Customers: Please contact your local Tektronix office
Xerox—Xerox offers QuickDraw GX printer drivers for Xerox DocuTech Network Publisher Model 90 and Xerox DocuTech Network Publisher Model 135. For information on how to obtain the driver, customers can send an electronic mail message to: GX.Roch817@Xerox.com
QuickDraw GX Fax Information
To fax with QuickDraw GX, you need a QuickDraw GX fax driver for your modem. Use the information below to contact the vendor about a fax driver for your modem.
Apple Telecom 2.0—This package includes Express Modem version 2.0 and GeoPort version 2.0, both of which support QuickDraw GX. To order the Apple Telecom 2.0 upgrade, call 1-800-769-2775 and ask for the Apple Telecom 2.0 upgrade. You can also get the upgrade from the following online services:
eWorld: go apple
CompuServe: GO APLSUP
America OnLine: keyword ftp, then connect to ftp.info.apple.com
FTP: ftp.info.apple.com
Web: http://www.info.apple.com
Global Village—GlobalFax version 2.5 supports QuickDraw GX. If you purchase a modem that includes GlobalFax 2.5 software, it will automatically install the GlobalFax GX fax driver as part of the standard installation. If you are using an older version of GlobalFax software, you can buy a GlobalFax 2.5 Upgrade from Global Village by calling 1-800-736-4821 or 1-408-523-1036. For more information about GlobalFax software, check Global Village forums on the following online services:
America Online: global
eWorld: go global
CompuServe: go global
Global Village BBS: 415-390-8334
Web: http://www.globalvillag.com
Cypress Research—If you use Cypress Research FaxPro II, call 408-752-2700 and ask for Technical Support.
STF Technologies—For information about our "FaxPrint GX" printer driver contact STF Customer
Service:
Phone Number: 816-463-2021
Fax Number: 816-463-7958
Bulletin Board: 816-463-1131
CompuServe: 74740,1244 (Go STFTech)
AppleLink: D1870
eWorld: STFTech
America OnLine: STFtech
Using Fonts
Type 1 Fonts Enabled During Installation
During installation, QuickDraw GX enables any Type 1 fonts found in the System Folder, the Fonts folder, or the Extensions folder. However, you must ensure that each Type 1 font family is in its own suitcase. The installer enabler will not enable your Type 1 fonts if multiple font families are contained in one suitcase. QuickDraw GX does the following:
• creates a new folder called •Archived Type 1 Fonts• in your Fonts folder
• moves all suitcases referring to Type 1 fonts to the •Archived Type 1 Fonts• folder
• moves all Type 1 outline font files to the •Archived Type 1 Fonts• folder
• makes a copy of the original suitcase and puts the copy in the Fonts folder
• creates one or more 'sfnt' font resources from the corresponding Type 1 outline font files and places the resources into the suitcase in the Fonts folder
The 'sfnt' (scalable font) resource was originally specified to contain TrueType font data. When QuickDraw GX enables a font, the 'sfnt' resource may contain either TrueType font data or PostScript Type 1 font data.
You can find instructions for installing QuickDraw GX in the Macintosh System 7.5 Upgrade Guide.
Adobe Type Manager version 3.8.3
ATM version 3.8.3 is installed with this version of QuickDraw GX. ATM 3.8.3 includes native support for Power Macintosh computers.
Type 1 fonts will display and print properly only if ATM is installed and turned on. As with previous versions, ATM 3.8.3 rasterizes Type 1 font data from the POST resource in conventional outline font files (file type LWFN). In addition, ATM 3.8.3 rasterizes Type 1 font data from the 'sfnt' resource in suitcase files (file type FFIL). ATM 3.8.3 does not include font substitution capability.
Enabling Type 1 Fonts After Installation
You may need to enable Type 1 fonts that are not located in the System Folder, the Fonts folder, or the Extensions folder. Or you may need to enable Type 1 fonts installed after you install QuickDraw GX. To enable Type 1 fonts, use the Type 1 Enabler (one of the QuickDraw GX Utilities). You must ensure that each Type 1 font family is in its own suitcase. The Type 1 Enabler will not enable your Type 1 fonts if multiple font families are contained in one suitcase.
To install the QuickDraw GX Utilities and enable Type 1 fonts, see the instructions in Chapter 3 ("Installing QuickDraw GX") of the Macintosh System 7.5 Upgrade Guide.
The Type 1 Enabler supports only Type 1 fonts. If the Type 1 Enabler program encounters a suitcase containing Type 3 fonts, it displays the message “Contains a Type 3 font program” and does not enable the suitcase.
The Type 1 Enabler does not enable hybrid fonts. If you see the message “Contains a hybrid font program (see README file for details)” when the Type 1 Enabler attempts to enable Optima or ITC Eras, it may be because you have an old version of these fonts.These fonts cannot be enabled because they are hybrid fonts. If you are a registered owner of Optima or ITC Eras, call Adobe Systems Technical Support to obtain an upgrade to the non-hybrid versions of these families.
Removing Duplicate Fonts
To make sure that QuickDraw GX properly manages currently installed fonts, you should make sure you have no duplicate fonts installed in the System Folder. Remove any duplicates that you find.
Apple, the Apple logo, AppleShare, LaserWriter, Macintosh, PowerBook, and Macintosh Quadra are trademarks of Apple Computer, Inc., registered in the U.S.A. and other countries. AudioVision, Balloon Help, Macintosh PC Exchange, Power Macintosh, QuickDraw, TrueType, and World Script are trademarks of Apple Computer, Inc. Acrobat, ATM, PostScript, Adobe PageMaker and Adobe Illustrator are trademarks of Adobe Systems Inc., which may be registered in certain jurisdictions. Optima is a trademark of Linotype-Hell AG and/or its subsidiaries. ITC Eras is a registered trademark of International Typeface Corporation. QuarkXPress is a registered trademark of Quark, Inc. All other product names are trademarks or registered trademarks of their respective holders. Mention of non-Apple products is for informational purposes and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance, or use of these products.
